The daunting task of actual musical creation is a little much for a young one to handle. But if they’ve expressed an interest in the computer (and let’s face it, if you use one at home, you probably have a time and a half keeping little hands away from the mouse), there’s more than a few programs out there that let them experiment with music and sound in a playful environment. Heck, some of them are even fun for adults as well!

Here’s one of my favorites:

Mono World

This Japanese program has no English instructions, so you and your young one will be at about the same level of expertise going in. Click on one of the ten buttons at the top of the screen to enter an activity, and then use the mouse in a variety of ways to interact with the simple shapes and make music. Hit Enter to return to the main menu. The abstract forms and very basic interactions make this an oddly soothing toy that can actually be used to create some pleasing music.

Download it here.

Continuing in my quest to make jug band musicians out of each and every kid exposed to this blog, I’m going to follow up my previous post on making a cigar box banjo with something to fill out the low end – a washtub bass. This classic hillbilly instrument is easy to make, fun to play, and makes laundry just a little bit harder to do.

You need:

1. A galvanized metal washtub – get this at your local hardware store.
2. A wooden pole – a broomstick works fine here.
3. Two metal washers, two nuts, a large eye screw, and a bolt
4. A length of medium-weight rope.
5. You’ll also need a drill and bit that can get through the metal of the washtub.

Instructions:

Start off by drilling a hole in the center of the washtub to let the eye screw through. This is a grown-up job, as children lack the trigonometric knowledge to accurately judge the center point of the circle. Also drills and metal are a little bit dangerous. While you’re drilling, drill a hole in one end of the pole for the bolt.

Screw the bolt into the pole so it’s sticking out from both sides.  Put the eye screw into the hole with a washer on each side and the nut at the bottom, and tighten the assemblage. Cut a groove into the end of the pole that doesn’t have the bolt on it so it fits on the lip of the washtub.

Finally, cut your rope to about eight feet and tie one end to the eye screw. Wrap the other end around the bolt in the pole and tighten it until it sits at about a 30 degree angle when the pole is resting on the lip. Tie it off so it’s tight. Now you should be ready to play – drop the lip in the groove, pull on the pole to make the rope tight and pluck it to make the washtub resonate with that classic bwoom sound.

Have fun, jugheads!